WTC Transportation Hub | Oculus & Transit Hall - Page 6

Otie · November 3rd, 2012, 01:05 AM

Quote:

Originally Posted by PMadFlyer

Yep, I can relate. Also, Ottie must have some friends in really high places, or its out there and I'm too busy to look. I don't want anything to do with modeling the hub. I'll stick with T1 and perhaps T3, if I can find time to look at the KPI records for the core and filler beam layout. That's some amazing work, it that what the tips look like or are they more hemispherical? I'm guessing they're too small to see from the ground, but I'm curious.

I can't disclose any information related to the prints. But hey, the PA (being a government agency) has the commitment to inform people about the projects that are being under their authority. Their website is rich of information, though you need to know how to dig. I'll give you the easy path for them: go here if you want to read the pdfs of Board Meetings, here for Freedom of Information Requests (alot of them are related to the previous WTC site), here for the Minutes archive, and here for all the direct contracts made by the PA (not including subcontracts).

And yes, the tip of each rafter has an oval shape finish, it is the meeting point of the two rounded sides.

image hosted on flickr

WTC Transportation Hub by Otie O'Daniel, on Flickr

PMadFlyer · November 9th, 2012, 05:04 AM

I think I'm picking up what you're putting down.

I used various unmentioned sources for my World Trade Center North Tower models. I might look into modeling the roof of the underground hall if you don't get to that yourself. I'm looking forward for updates on the physical model and also how the flying ribs attach to the existing structure. Maybe you could make a sketch.
is it something like:

BStyles at Wired New York
I might make a better 3WTC model if I can find more sources without setting off alarms.

Otie · November 22nd, 2012, 06:09 AM

Sorry for late post, been quite bussy. As I previously posted on the Hub thread, every wing consists of three major components, where each component is divided again by sections. For example, the portals are sectioned in three: subportal, lower and upper portal sections. The arch section comes complete and the rafters are divided according to the length (some of them are so short that there's no need to splice them)

micehr · November 24th, 2012, 05:17 PM

I'm wondering, which material do you use for the wings in the model. And are you going to make them all with hand or are you able to use a shaper that makes it via computer drawings?

Otie · November 25th, 2012, 08:24 AM

After several examinations and reviewing the real life dimensions, I'll go for the 1mm cardboard. I will print the overall dimensions of each wing and then use the papers as a reference when I cut them manually.

micehr · November 25th, 2012, 04:48 PM

Wow, i give you already a lot of respect for this work, I don't think, I would have the patience to make each wing by my self. But I guess you are so dedicated to this project like I am with the Robie House. So it's kind of a motivation to make it as clean and perfect as possible.

Otie · November 26th, 2012, 04:38 AM

^There's a total of 114 ribs to cut, the 3D model is complete, so I'm just waiting to have the time and repair my printer to continue with the scale model.

I'm waiting for more updates on your FLW house, keep 'em coming!

ChuckInTN · November 30th, 2012, 02:14 AM

Did somebody say The Robie House?

The fun starts at 1:05:

http://www.youtube.com/watch?v=mK9Q2nLFfw4

micehr · November 30th, 2012, 11:51 AM

Oh yes. That's a nice one. I know this Lego Model and I really like it, that Lego startet to have an architecture line, but here in Germany it's f***ing expensive.

Otie · January 5th, 2013, 07:51 AM

Printer back, ribs on their way!

Skyscrapers144 · January 5th, 2013, 04:27 PM

AWESOMENESS!!!!!!!!!!!

Jongeheer · January 6th, 2013, 08:16 PM

Haha indeed!

CNTower246810 · January 19th, 2013, 09:59 PM

I am very glad to hear that your printer is fixed! I still can't wait for you to install the flying ribs on this masterpiece!

Do you have any idea of where you are going to put it when it's done?

Otie · January 21st, 2013, 05:00 AM

My friend hasn't given me the damn camera, first pieces were installed a long time ago on the east section, they look quite nice.

Model will be placed at my desktop

CNTower246810 · February 3rd, 2013, 05:33 AM

Haha.

I want to see it so bad! The suspense is killing me!

You must have one huge desk cause the pictures of the model make it look huge!

3dstructures-heerlen · March 22nd, 2013, 11:13 PM

Show us some pictures man! If the machine fails handcut the ribs! you be fine!

AlePa2013 · May 6th, 2013, 05:34 AM

when you start the construction of Oculus above the street level?

November 22nd, 2012, 06:09 AM	#103
Otie O' Daniel Join Date: Dec 2010 Location: Arrow City Posts: 2,661 Likes (Received): 269	Sorry for late post, been quite bussy. As I previously posted on the Hub thread, every wing consists of three major components, where each component is divided again by sections. For example, the portals are sectioned in three: subportal, lower and upper portal sections. The arch section comes complete and the rafters are divided according to the length (some of them are so short that there's no need to splice them) __________________ WTC Transportation Hub 3D Project

November 25th, 2012, 08:24 AM	#105
Otie O' Daniel Join Date: Dec 2010 Location: Arrow City Posts: 2,661 Likes (Received): 269	After several examinations and reviewing the real life dimensions, I'll go for the 1mm cardboard. I will print the overall dimensions of each wing and then use the papers as a reference when I cut them manually. __________________ WTC Transportation Hub 3D Project

November 26th, 2012, 04:38 AM	#107
Otie O' Daniel Join Date: Dec 2010 Location: Arrow City Posts: 2,661 Likes (Received): 269	^There's a total of 114 ribs to cut, the 3D model is complete, so I'm just waiting to have the time and repair my printer to continue with the scale model. I'm waiting for more updates on your FLW house, keep 'em coming! __________________ WTC Transportation Hub 3D Project

January 5th, 2013, 07:51 AM	#110
Otie O' Daniel Join Date: Dec 2010 Location: Arrow City Posts: 2,661 Likes (Received): 269	Printer back, ribs on their way! __________________ WTC Transportation Hub 3D Project

January 5th, 2013, 04:27 PM	#111
Skyscrapers144 Gangnam Style! Join Date: Dec 2009 Location: SkyscraperCity Posts: 6,637 Likes (Received): 51	AWESOMENESS!!!!!!!!!!! __________________ WEBSITE BURJ KHALIFA BASE JUMP

November 9th, 2012, 05:04 AM	#102
PMadFlyer Registered User Join Date: Jul 2012 Posts: 314 Likes (Received): 153	I think I'm picking up what you're putting down. I used various unmentioned sources for my World Trade Center North Tower models. I might look into modeling the roof of the underground hall if you don't get to that yourself. I'm looking forward for updates on the physical model and also how the flying ribs attach to the existing structure. Maybe you could make a sketch. is it something like: BStyles at Wired New York I might make a better 3WTC model if I can find more sources without setting off alarms.

November 24th, 2012, 05:17 PM	#104
micehr Registered User Join Date: Nov 2012 Posts: 53 Likes (Received): 0	I'm wondering, which material do you use for the wings in the model. And are you going to make them all with hand or are you able to use a shaper that makes it via computer drawings?

November 25th, 2012, 04:48 PM	#106
micehr Registered User Join Date: Nov 2012 Posts: 53 Likes (Received): 0	Wow, i give you already a lot of respect for this work, I don't think, I would have the patience to make each wing by my self. But I guess you are so dedicated to this project like I am with the Robie House. So it's kind of a motivation to make it as clean and perfect as possible.

November 30th, 2012, 02:14 AM	#108
ChuckInTN Registered User Join Date: Jul 2012 Posts: 85 Likes (Received): 2	Did somebody say The Robie House? The fun starts at 1:05: http://www.youtube.com/watch?v=mK9Q2nLFfw4

November 30th, 2012, 11:51 AM	#109
micehr Registered User Join Date: Nov 2012 Posts: 53 Likes (Received): 0	Oh yes. That's a nice one. I know this Lego Model and I really like it, that Lego startet to have an architecture line, but here in Germany it's f***ing expensive.

January 6th, 2013, 08:16 PM	#112
Jongeheer Registered User Join Date: Sep 2010 Location: Ghent Posts: 2,134 Likes (Received): 63	Haha indeed! __________________ Ghent Theft Auto

January 19th, 2013, 09:59 PM	#113
CNTower246810 Call me TKD Join Date: Jun 2009 Posts: 7,640 Likes (Received): 74	I am very glad to hear that your printer is fixed! I still can't wait for you to install the flying ribs on this masterpiece! Do you have any idea of where you are going to put it when it's done?

January 21st, 2013, 05:00 AM	#114
Otie O' Daniel Join Date: Dec 2010 Location: Arrow City Posts: 2,661 Likes (Received): 269	My friend hasn't given me the damn camera, first pieces were installed a long time ago on the east section, they look quite nice. Model will be placed at my desktop __________________ WTC Transportation Hub 3D Project

February 3rd, 2013, 05:33 AM	#115
CNTower246810 Call me TKD Join Date: Jun 2009 Posts: 7,640 Likes (Received): 74	Haha. I want to see it so bad! The suspense is killing me! You must have one huge desk cause the pictures of the model make it look huge!

March 22nd, 2013, 11:13 PM	#116
3dstructures-heerlen Registered User Join Date: Feb 2013 Posts: 8 Likes (Received): 0	Show us some pictures man! If the machine fails handcut the ribs! you be fine!

May 6th, 2013, 05:34 AM	#117
AlePa2013 Registered User Join Date: Feb 2013 Location: Salta Posts: 35 Likes (Received): 1	when you start the construction of Oculus above the street level?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode